Microsoft.Practices.EnterpriseLibrary.Validation

Represents a .

Configuration object to describe an instance of class .

Base class for configuration objects describing validators.

Represents the behavior to create a validator for a target type.

Initializes a new instance of the class.

Initializes a new instance of the class with a name and a type.

The name for the instance. The type of the represented validator.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Creates the described by the configuration object.

The type of object that will be validated by the validator. The type of the object from which the value to validate is extracted. The to use for validators that require access to properties. The created . The default implementation invokes . Subclasses requiring access to all the parameters or this method may override it instead of .

Creates the described by the configuration object.

The type of object that will be validated by the validator. This operation must be overriden by subclasses. The created .

Returns the message template for the represented validator.

The textual message is given precedence over the resource based mechanism.

Gets or sets the message template to use when logging validation results.

Either the or the pair and can be used to provide a message template for the represented validator. If both the template and the resource reference are specified, the template will be used.

Gets or sets the name of the resource to retrieve the message template to use when logging validation results.

Used in combination with . Either the or the pair and can be used to provide a message template for the represented validator. If both the template and the resource reference are specified, the template will be used.

Gets or sets the name of the type to retrieve the message template to use when logging validation results.

Gets or sets the tag that will characterize the results logged by the represented validator.

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance. The runtime type.

Initializes a new instance of the class with a name.

The name for the instance. The runtime type.

Gets or sets the value to specify the behavior for the represented should have a negated.

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

Creates the described by the configuration object.

Gets or sets the describing the comparison that the represented .

Gets or sets the name of the property that the represented will use to retrieve the value to compare.

Base class for WMI events fired when an validation operation is performed.

Base class for validation WMI events.

Initializes a new instance of the class.

The name of the type being validated.

Gets the name of the type being validated.

Let the system know that the InstallUtil.exe tool will be run against this assembly

Represents the installer for the instrumentation events. Not intended for direct use.

Required designer variable.

Clean up any resources being used.

true if managed resources should be disposed; otherwise, false.

Required method for Designer support - do not modify the contents of this method with the code editor.

Represents the WMI event fired when an exception is thrown while performing a validation operation.

Initializes a new instance of the class.

The name of the type being validated. The message of the thrown exception.

Gets the message of the thrown .

Represents the WMI event fired when a validation operation is sucessful.

Initializes a new instance of the class.

The name of the type being validated.

Represents the WMI event fired when an error in the configuration for the validation block is detected.

Initializes a new instance of the class.

The message that represents the exception thrown when the configuration error was detected.

Gets the message that represents the exception thrown when the configuration error was detected.

Represents the WMI event fired when a validation operation results in a validation failure.

Initializes a new instance of the class.

The name of the type being validated.

Provides the concrete instrumentation for the logical events raised by a object.

Initializes a new instance of the class.

true if performance counters should be updated. true if event log entries should be written. true if WMI events should be fired. The application instance name.

Initializes a new instance of the class.

true if performance counters should be updated. true if event log entries should be written. true if WMI events should be fired. Creates unique name for each instance.

This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code. Handler for the event.

Sender of the event. Data for the event.

This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code. Handler for the event.

Sender of the event. Data for the event.

This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code. Handler for the event.

Sender of the event. Data for the event.

This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code. Handler for the event.

Sender of the event. Data for the event.

This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code. Handler for the event.

Sender of the event. Data for the event.

Creates the performance counters to instrument the validation events to the instance names.

The instance names for the performance counters.

This type supports the Enterprise Library infrastructure and is not intended to be used directly from your code. Represents the process to build a according to the instrumentation configuration.

This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code. Builds a .

The that represents the current building process. The name of the instance to build. It is part of the method, but it is not used in this implementation. The source for configuration objects. The cache to use retrieving reflection information. A fully initialized instance of .

Defines the logical events that can be instrumented for the validation block.

The concrete instrumentation is provided by an object bound to the events of the provider. The default listener, automatically bound during construction, is .

Occurs when a validation operation is performed.

Occurs when a validation operation is successful.

Occurs when a validation operation fails.

Occurs when an exception is thrown while performing a validation operation.

Occurs when a failure is detected when accessing the configuration settings for the validation block.

Base class for validation events.

Gets the type being validated.

Provides data for the event.

Gets the result of the failed validation.

Provides data for the event.

Gets the exception that describes the configuration error.

Provides data for the event.

Gets the message that describes the failure.

Gets the exception that caused the failure.

Wrapper for validation that instantiates them on each increment request.

Initializes a new instance of the class.

The counter category name. The counter name.

Increments the associated performance counters by one.

The instance to be incremented.

Creates objects for member descriptors.

Subclasses might return implementations that do not assume a value is being extracted from the type that owns the member descriptors. This is necessary in the integration scenarios.

Creates a suitable for accessing the value in .

The representing the field for which a is required. The that allows for accessing the value in . when is .

Performs the actual creation of a suitable for accessing the value in .

The representing the field for which a is required. The that allows for accessing the value in .

Creates a suitable for accessing the return value for .

The representing the method for which a is required. The that allows for accessing the value in . when is . when represents a method with a non-void return type. when represents a method with parameters.

Performs the actual creation of a suitable for accessing the value in .

The representing the method for which a is required. The that allows for accessing the value in .

Creates a suitable for accessing the value for .

The representing the property for which a is required. The that allows for accessing the value in . when is .

Performs the actual creation of a suitable for accessing the value in .

The representing the property for which a is required. The that allows for accessing the value in .

Represents the description of how validation must be performed on a language element.

A special factory class that creates Validator objects based on attributes specified on a method parameter.

Create a instance based on the validation attributes on the given parameter.

This factory method ignores configuration and rulesets. For parameters, only attribute based configuration is supported at this time. The for the parameter to construct a validator for. The

Base class for validation related attributes.

Holds shared information about validation.

Returns the message template for the represented validator.

The textual message is given precedence over the resource based mechanism.

Gets or set the ruleset to which the represented validator belongs.

Gets or sets the message template to use when logging validation results.

Either the or the pair and can be used to provide a message template for the represented validator. If both mechanisms are specified an exception occurs. when setting the value and either or have been set already.

Gets or sets the name of the resource to retrieve the message template to use when logging validation results.

Used in combination with . Either the or the pair and can be used to provide a message template for the represented validator. If both mechanisms are specified an exception occurs. when setting the value and the has been set already.

Gets or sets the name of the type to retrieve the message template to use when logging validation results.

Gets or sets the tag that will characterize the results logged by the represented validator.

Represents the different comparison behaviors available for a .

Comparison for equal.

Comparison for not equal.

Comparison for greater.

Comparison for greater or equal.

Comparison for lesser.

Comparison for lesser or equal.

Helps building validators composed by other validators.

Returns the validator created by the builder.

Creates the composite validator built by the builder.

Represents the description of how validation must be performed on a language element as defined by configuration.

This class is a flyweight, so instances should not be kept for later use.

Represents the description of how validation must be performed on a type as defined by configuration.

Represents the description of how validation must be performed on a type.

Encapsulates shared validator building behavior.

This class relies on implementations of to supply validation descriptors.

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

Gets the collection with the definitions for the validators composed by the represented .

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Gets or sets the string containing the characters to use by the represented .

Gets or sets the value indicating the behavior for the represented .

Describes a .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

Gets or sets the lower bound for the represented validator.

Gets or sets the lower bound type for the represented validator.

Gets or sets the upper bound for the represented validator.

Gets or sets the upper bound type for the represented validator.

Represents an individual domain element for a .

Initialize a new instance of a class.

Intialize a new instance of a class with a name.

The name of the element.

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Gets the collection of elements for the domain for the represented .

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Gets or sets the enum element type.

Gets or sets the name of the target element type for the represented validator.

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Gets or sets the unit to use when calculating the relative lower bound for the represented .

Gets or sets the unit to use when calculating the relative upper bound for the represented .

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Gets or sets name of the type the represented must use for testing conversion.

Gets or sets the target element type.

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created . when the receiver's target type is .

Gets or sets the target element type.

The target element type.

Gets or sets the name of the target element type for the represented validator.

Gets or sets the name for the target ruleset for the represented validator.

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Gets or sets the name for the target ruleset for the represented validator.

Represents the validation informamtion for a member of a type.

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Gets the collection of validators configured for the member.

Configuration object to describe an instance of custom class.

Custom classes must implement a constructor with with name and value collection parameters.

Initializes with default values.

Initializes with name and provider type.

Sets the attribute value for a key.

The attribute name. The attribute value.

Modifies the object to remove all values that should not be saved.

A object at the current level containing a merged view of the properties. A parent object or if this is the top level. One of the values.

Resets the internal state of the object, including the locks and the properties collection.

The parent element.

Indicates whether this configuration element has been modified since it was last saved or loaded when implemented in a derived class.

if the element has been modified; otherwise, .

Called when an unknown attribute is encountered while deserializing the object.

The name of the unrecognized attribute. The value of the unrecognized attribute. if the processing of the element should continue; otherwise, .

Invokes the inherited behavior.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Gets or sets custom configuration attributes.

Gets a of the properties that are defined for this configuration element when implemented in a derived class.

A of the properties that are defined for this configuration element when implemented in a derived class.

Gets the helper.

Describes a .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Describes a .

Initializes a new instance of the class.

The configuration object name.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

Gets the collection with the definitions for the validators composed by the represented .

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Gets or sets the pattern for the represented validator.

Gets or sets the regex options for the represented validator.

Gets or sets the name of the resource holding the regex pattern.

Gets or sets the name of the resource type holding the regex pattern.

Gets or sets the enum element type.

Configuration object to describe an instance of class .

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created .

Represents the validation information for a field.

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Represents a collection of validated fields.

Initializes a new instance of the class.

Represents the validation information for a method.

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Represents a collection of validated methods.

Initializes a new instance of the class.

Represents the validation information for a property.

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Represents a collection of validated properties.

Initializes a new instance of the class.

Represents a ruleset for a validated type.

Self validation is not supported thorugh configuration.

Initializes a new instance of the class.

Initializes a new instance of the class with a name.

The name for the instance.

Gets the collection of validators configured for the type owning the ruleset.

Gets the collection of validated fields for the type owning the ruleset.

Gets the collection of validated methods for the type owning the ruleset.

Gets the collection of validated properties for the type owning the ruleset.

Represents a collection of validated properties.

Initializes a new instance of the class.

Configuration section for stored validation information.

The name used to serialize the configuration section.

Gets the collection of types for which validation has been configured.

Represents validation information for a type and its members.

Initializes a new instance of the class.

Initializes a new instance of the class with a type.

The represented type.

Gets the collection with the validation rulesets configured the represented type.

Gets or sets the default ruleset for the represented type.

Used to resolve the reference type in designtime. This property is ignored at runtime.

Represents a collection of validation rulesets.

Initializes a new instance of the class.

Represents a collection of validator configuration objects.

Initializes a new instance of the class.

Represents the behavior necessary to provide integration with the validation block.

Performs a custom conversion of a value to validate.

The containing the value to convert. Implementors should set the with the conversion result, and set the should an error occur during conversion.

Retrieves the raw value to validate, before conversion.

Gets the to use when building a in an integration scenario.

Gets the ruleset to use when building validators in an integration scenario.

Gets the to use when building validators in an integration scenario.

Gets the indication of whether custom value conversion should be performed during validation.

Gets the name of the property to use when building validators in an integration scenario.

Gets the type to use when building validators in an integration scenario.

Encapsulates the logic used to link validation for integration scenarios.

Initializes a new instance of the for an .

when is . when configuration is not complete.

Returns the represented by the configuration in the , linked with the integration scenario as necessary.

Returns the value to validate.

Provides data to perform custom value conversions in validation integration scenarios.

Initializes a new instance of the class.

The raw value to convert. The type to which the needs to be converted to. The object from which the value was extracted. The name of the property

Gets the value to convert, as retrieved from the control.

Gets the type to which the value should be converted.

Gets the object for which the validation requiring the value conversion is being performed.

Gets the name of the property that maps to the control that supplied the value to convert.

Gets or sets the converted value.

This property must be set to the desired value; otherwise the will be used.

Gets or sets the message describing the conversion failure.

The error message should be set to if conversion was successful.

Represents the description of how validation must be performed on a language element as defined by attributes.

This class is a flyweight, so instances should not be kept for later use.

Represents the description of how validation must be performed on a type as defined by attributes.

This class is a flyweight, so instances should not be kept for later use.

Factory for creating objects for properties.

Resets the cached validators.

Returns a for as defined in the validation specification for .

The type for which the validation specification must be retrieved. The property for which the validator must be returned. The ruleset to use when retrieving validation information, or an empty string to use the default ruleset. The indicating where to retrieve validation specifications. The appropriate validator, or null if there is no such validator specified. when is . when is . when is not a readable property. Both and must be provided as might be different from the declaring type for .

Specifies the kind of filtering to perform for

Include results with the supplied tags.

Ignore results with the supplied tags.

Specifies the required source for validation information when invoking creation methods.

Validation information is to be retrieved from attributes.

Validation information is to be retrieved from configuration.

Validation information is to be retrieved from both attributes and configuration.

Specifies the kind of composition that is to be used when multiple validation attributes are supplied for a member info.

Use the .

Returns an object that will build a ValueAccessValidator for with the supplied validation modifiers.

A for the supplied parameters. when is .

Returns an object that will build a ValueAccessValidator for with the supplied validation modifiers.

A for the supplied parameters. when is .

Returns an object that will build a ValueAccessValidator for with the supplied validation modifiers.

A for the supplied parameters. when is . when returns . when has parameters.

Aggregates a set of instances, performing validation by allowing each validator to perform its own.

Validation fails if any of the composed validators fails.

Represents logic used to validate an object.

Initializes a new instance of the class.

The template to use when logging validation results, or we the default message template is to be used. The tag to set when logging validation results, or .

Applies the validation logic represented by the receiver on an object, returning the validation results.

The object to validate. The representing the outcome of the validation.

Applies the validation logic represented by the receiver on an object, adding the validation results to .

The object to validate. The validation results to which the outcome of the validation should be stored.

Implements the validation logic for the receiver.

Logs a validation result to .

The validation results to which the new result should be stored. The message that describes the result. The object to which the result is related to. The key that identifies how the result relates to the target.

Logs a validation result to .

Gets the message representing a failed validation.

The object for which validation was performed. The key representing the value being validated for . The message representing the validation failure. The default validation maessage formatting provides the object to validate, the key and the tag. Subclasses may provide additional formatting parameters.

Gets the message template to use when logging results no message is supplied.

Gets or sets the message template to use when logging results.

The will be returned if no message was specified.

Gets a value characterizing the logged result.

Initializes a new instance of the class.

The validators to be composed by the created instance.

Implements the validation logic for the receiver, invoking validation on the composed validators.

Gets the message template to use when logging results no message is supplied.

This validator does not log messages of its own.

Represents the behavior of the .

Indicates that validation is considered successful when at least one character in the character set is included in the validated value.

Indicates that validation is considered successful when at all the characters in the character set are included in the validated value.

Performs validation on strings by verifying if it contains a character set using the mode.

Base class for strongly typed validators on simple values.

The type of value to validate. Validating values of types different that results in a validation failure.

Represents logic used to validate an instance of .

The type of objects the can be validated. Generic validators will still answer the non-generic validation requests, logging a failure when the validation target is not compatible with the .

Initializes a new instance of the class.

The template to use when logging validation results, or we the default message template is to be used. The tag to set when logging validation results, or .

Applies the validation logic represented by the receiver on an instance of , returning the validation results.

The instance of to validate. The representing the outcome of the validation.

Applies the validation logic represented by the receiver on an instance of , adding the validation results to .

The instance of to validate. The validation results to which the outcome of the validation should be stored.

Implements the validation logic for the receiver.

The object to validate. The object on the behalf of which the validation is performed. The key that identifies the source of . The validation results to which the outcome of the validation should be stored. The implementation for this method will perform type checking and converstion before forwarding the validation request to method .

Implements the validation logic for the receiver.

The instance of to validate. The object on the behalf of which the validation is performed. The key that identifies the source of . The validation results to which the outcome of the validation should be stored. Subclasses must provide a concrete implementation the validation logic.

Initializes a new instance of the class.

The template to use when logging validation results, or we the default message template is to be used. The tag to set when logging validation results, or . Indicates if the validation logic represented by the validator should be negated.

Gets the indication of negated validation logic.

if the default validation logic should be used; othwerise .

Gets the default message template for de validator.

Gets the Default Message Template when the validator is non negated.

Gets the Default Message Template when the validator is negated.

Initializes a new instance of the .

The string containing the set of allowed characters.

Initializes a new instance of the .

The string containing the set of allowed characters. The specifying the kind of character matching behavior.

Initializes a new instance of the .

The string containing the set of allowed characters. The specifying the kind of character matching behavior. The message template to use when logging results.

Initializes a new instance of the .

The string containing the set of allowed characters. The specifying the kind of character matching behavior. Indicates if the validation logic represented by the validator should be negated.

Initializes a new instance of the .

The string containing the set of allowed characters. The specifying the kind of character matching behavior. The message template to use when logging results. Indicates if the validation logic represented by the validator should be negated.

Implements the validation logic for the receiver.

Gets the message representing a failed validation.

The object for which validation was performed. The key representing the value being validated for . The message representing the validation failure.

Gets the Default Message Template when the validator is non negated.

Gets the Default Message Template when the validator is negated.

Represents a .

Describes a .

Describes the validation logic that must be applied to a language element when creating a for a type.

Multiple validator attributes can be specified for a language element. All the rules will be applied as an "And" composition unless the overrides this behavior. A ruleset can be specified for the attribute, as well as message overrides (either literal or resource based).

Creates the described by the configuration object.

The type of object that will be validated by the validator. The created . Sets the tag and message template to the created validator.

Creates the described by the configuration object.

Creates the described by the attribute object providing validator specific information.

The type of object that will be validated by the validator. This operation must be overriden by subclasses. The created .

Initializes a new instance of the

Gets or sets the flag indicating if the validator to create should be negated.

Initializes a new instance of the

The character set to be evaluated.

Initializes a new instance of the

The character set to be evaluated. The mode to evaluate the character set.

Creates the described by the attribute object.

The type of object that will be validated by the validator. This operation must be overriden by subclasses. The created .

Validates the value of a field using a configured validator.

The type for which validation on a member is to be performed.

Base generic validator for member access validation.

The type for which validation on a member is to be performed.

Initializes a new instance of the class.

The to use when accessing the value of the validated member. The to validate the value of the validated member.

Validates extracting a value from and applying a validator to it.

Gets the message template to use when logging results no message is supplied.

Initializes a new instance of the class.

The name of the field to validate. The validator for the value of the field.

Validates the return value of a method without parameters using a configured validator.

The type for which validation on a method is to be performed.

Initializes a new instance of the class.

The name of the method to validate. The validator for the value of the method.

Performs validation by comparing the a value with the value of a property on the target object by using a specified comparison operation.

Performs validation by comparing the provided value with another value extracted from the validation target.

Base class for validators on simple values.

Initializes a new instance of the class.

Gets the indication of negated validation logic.

if the default validation logic should be used; othwerise .

Gets the default message template for de validator.

Gets the Default Message Template when the validator is non negated.

Gets the Default Message Template when the validator is negated.

Initializes a new instance of the class.

The to use when extracting the comparison operand. The that specifies the kind of comparison to perform.

Initializes a new instance of the class.

The to use when extracting the comparison operand. The that specifies the kind of comparison to perform. The message template to use when logging validation failures. The tag that describes the purpose of the validator.

Initializes a new instance of the class.

The to use when extracting the comparison operand. The that specifies the kind of comparison to perform. The message template to use when logging validation failures. Indicates if the validation logic represented by the validator should be negated.

Initializes a new instance of the class.

Validates by comparing with the result of extracting a value from usign the configured using the configured .

Gets the Default Message Template when the validator is non negated.

Gets the Default Message Template when the validator is negated.

Initializes a new instance of the class.

The to use to extract the value to compare. The representing the kind of comparison to perform.

Initializes a new instance of the class.

The to use to extract the value to compare. The representing the kind of comparison to perform. Indicates if the validation logic represented by the validator should be negated.

Represents a .

Initializes a new instance of the class.

The name of the property to use when comparing a value. The representing the kind of comparison to perform.

Creates the described by the attribute.

Creates the described by the attribute object providing validator specific information.

The type of object that will be validated by the validator. This method must not be called on this class. Call .

Validates the value of a property using a configured validator.

The type for which validation on a property is to be performed.

Initializes a new instance of the class.

The name of the property to validate. The validator for the value of the property.

Represents a .

Initializes a new instance of the class with fully specified int bound constraints.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check.

Initializes a new instance of the class with fully specified double bound constraints.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check.

Initializes a new instance of the class with fully specified DateTime bound constraints.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check.

Initializes a new instance of the class with fully specified long bound constraints.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check.

Initializes a new instance of the class with fully specified string bound constraints.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check.

Initializes a new instance of the class with fully specified float bound constraints.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check.

Initializes a new instance of the class with fully specified bound constraints using string representations of the boundaries.

The type of the boundaries. The lower bound represented with a string, or . The indication of how to perform the lower bound check. The upper bound, or . The indication of how to perform the upper bound check.

Creates the described by the attribute object.

The type of object that will be validated by the validator. This operation must be overriden by subclasses. The created .

Performs validation on instances by comparing them to the specified boundaries.

is logged as a failure. The type of the objects to compare. Must implement .

Initializes a new instance of the class with an upper bound constraint.

The upper bound. No lower bound constraints will be checked by this instance, and the upper bound check will be .

Initializes a new instance of the class with an upper bound constraint.

The upper bound. True if the validator must negate the result of the validation. No lower bound constraints will be checked by this instance, and the upper bound check will be .

Initializes a new instance of the class with lower and upper bound constraints.

The lower bound. The upper bound. Both bound checks will be .

Initializes a new instance of the class with lower and upper bound constraints.

The lower bound. The upper bound. True if the validator must negate the result of the validation. Both bound checks will be .

Initializes a new instance of the class with fully specified bound constraints.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check.

Initializes a new instance of the class with fully specified bound constraints.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check. True if the validator must negate the result of the validation.

Initializes a new instance of the class with fully specified bound constraints and a message template.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check. The message template to use when logging results.

Initializes a new instance of the class with fully specified bound constraints and a message template.

The lower bound. The indication of how to perform the lower bound check. The upper bound. The indication of how to perform the upper bound check. The message template to use when logging results. True if the validator must negate the result of the validation.

Validates by comparing with the constraints specified for the validator.

Gets the message representing a failed validation.

The object for which validation was performed. The key representing the value being validated for . The message representing the validation failure.

Gets the Default Message Template when the validator is non negated.

Gets the Default Message Template when the validator is negated.

Date time unit.

No units.

Seconds.

Minutes.

Hours.

Days.

Months.

Years.

Validates an object by checking if it belongs to a set.

Initializes a new instance of the .

List of values to be used in the validation.

Initializes a new instance of the .

True if the validator must negate the result of the validation. List of values to be used in the validation.

Initializes a new instance of the .

The message template to use when logging results. List of values to be used in the validation.

Initializes a new instance of the .

List of values to be used in the validation. True if the validator must negate the result of the validation.

Initializes a new instance of the .

List of values to be used in the validation. The message template to use when logging results. True if the validator must negate the result of the validation.

Implements the validation logic for the receiver.

Gets the Default Message Template when the validator is non negated.

Gets the Default Message Template when the validator is negated.

Represents a .

Initializes a new instance of the .

List of values to be used in the validation.

Creates the described by the attribute object.

The type of object that will be validated by the validator. This operation must be overriden by subclasses. The created .

Validates a value by checking it belongs to a range relative to the current date.

Initializes a new instance of the .

The upper bound The upper bound unit of time.

Initializes a new instance of the .

The upper bound The upper bound unit of time. True if the validator must negate the result of the validation.

Initializes a new instance of the .

The upper bound The upper bound unit of time. The message template to use when logging results.

Initializes a new instance of the .

The upper bound The upper bound unit of time. The message template to use when logging results. True if the validator must negate the result of the validation.

Initializes a new instance of the .

The upper bound The upper bound unit of time. The indication of how to perform the upper bound check.

Initializes a new instance of the .

The upper bound The upper bound unit of time. The indication of how to perform the upper bound check. True if the validator must negate the result of the validation.

Initializes a new instance of the .

The upper bound The upper bound unit of time. The indication of how to perform the upper bound check. The message template to use when logging results.

Initializes a new instance of the .

The upper bound The upper bound unit of time. The indication of how to perform the upper bound check. The message template to use when logging results. True if the validator must negate the result of the validation.

Initializes a new instance of the .

The lower bound. The lower bound unit of time. The upper bound The upper bound unit of time.

Initializes a new instance of the .

The lower bound. The lower bound unit of time. The upper bound The upper bound unit of time. True if the validator must negate the result of the validation.

Initializes a new instance of the .

The lower bound. The lower bound unit of time. The indication of how to perform the lower bound check. The upper bound The upper bound unit of time. The indication of how to perform the upper bound check.

Initializes a new instance of the .

True if the validator must negate the result of the validation. The lower bound. The lower bound unit of time. The indication of how to perform the lower bound check. The upper bound The upper bound unit of time. The indication of how to perform the upper bound check.

Initializes a new instance of the .

The message template to use when logging results. The lower bound. The lower bound unit of time. The indication of how to perform the lower bound check. The upper bound The upper bound unit of time. The indication of how to perform the upper bound check.

Initializes a new instance of the .

True if the validator must negate the result of the validation. The message template to use when logging results. The lower bound. The lower bound unit of time. The indication of how to perform the lower bound check. The upper bound The upper bound unit of time. The indication of how to perform the upper bound check.

Implements the validation logic for the receiver.

The object to validate. The object on the behalf of which the validation is performed. The key that identifies the source of . The validation results to which the outcome of the validation should be stored. The implementation for this method will perform type checking and converstion before forwarding the validation request to method .

Implements the validation logic for the receiver.

Gets the message representing a failed validation.

The object for which validation was performed. The key representing the value being validated for . The message representing the validation failure.

Gets the Default Message Template when the validator is non negated.

Gets the Default Message Template when the validator is negated.

Represents a .

Initializes a new instance of the .

The upper bound The upper bound unit of time.

Initializes a new instance of the .

The upper bound The upper bound unit of time. The indication of how to perform the upper bound check.

Initializes a new instance of the .

The lower bound. The lower bound unit of time. The upper bound The upper bound unit of time.

Initializes a new instance of the .

Creates the described by the attribute object.

The type of object that will be validated by the validator. This operation must be overriden by subclasses. The created .

Validates a string by checking it represents a value for a given type.

Initializes a new instance of the .

The supplied type to used to determine if the string can be converted to it.

Initializes a new instance of the .

True if the validator must negate the result of the validation. The supplied type to used to determine if the string can be converted to it.

Initializes a new instance of the .

The message template to use when logging results. The supplied type to used to determine if the string can be converted to it.

Initializes a new instance of the .

True if the validator must negate the result of the validation. The message template to use when logging results. The supplied type to used to determine if the string can be converted to it.

Implements the validation logic for the receiver.

Gets the message representing a failed validation.

The object for which validation was performed. The key representing the value being validated for . The message representing the validation failure.

Gets the Default Message Template when the validator is non negated.

Gets the Default Message Template when the validator is negated.

Represents a .

Initializes a new instance of the .

The supplied type to used to determine if the string can be converted to it.

Creates the described by the attribute object.

The type of object that will be validated by the validator. This operation must be overriden by subclasses. The created .

Validator that wraps other validators and adds instrumentation support.

Initializes a new instance of the .

The wrapped providing the actual validation.

Invokes the validation logic from the wrapped and updates the instrumentation informamtion.

Returns the object that provides instrumentation services for the .

The object that providers intrumentation services. This object may be null if instrumentation services are not created for this instance.

Gets the message template to use when logging results no message is supplied.

This validator does not issue any messages of its own, so the default message template is .

Only for testing purposes

Validates a string by checking it represents a value for a given enum type.

Initializes a new instance of the .

The enum type to check if the string can be converted.

Initializes a new instance of the .

The enum type to check if the string can be converted. True if the validator must negate the result of the validation.

Initializes a new instance of the .

The enum type to check if the string can be converted. The message template to use when logging results.

Initializes a new instance of the .

The enum type to check if the string can be converted. The message template to use when logging results. True if the validator must negate the result of the validation.

Implements the validation logic for the receiver.

Gets the message representing a failed validation.

The object for which validation was performed. The key representing the value being validated for . The message representing the validation failure.

Gets the Default Message Template when the validator is non negated.

Gets the Default Message Template when the validator is negated.

Represents a .

Initializes a new instance of the

Creates the described by the attribute object.

The type of object that will be validated by the validator. This operation must be overriden by subclasses. The created .

Indicates the target type defines self validation methods.

Types without this attribute will not be scanned for self validation methods.

Performs validation on instances by comparing them to the specified boundaries.

is logged as a failure.