Microsoft.Practices.EnterpriseLibrary.ExceptionHandling
Configuration object for Custom Providers.
Represents the configuration for an .
Initializes an instance of a class.
Initializes an instance of an class with a name and an type.
The name of the configured .
The configured type.
Initializes with default values.
Initializes with name and provider type.
Initializes with name and provider type.
Sets the attribute value for a key.
The attribute name.
The attribute value.
Modifies the object to remove all values that should not be saved.
A object at the current level containing a merged view of the properties.
A parent object or if this is the top level.
One of the values.
Resets the internal state of the object,
including the locks and the properties collection.
The parent element.
Indicates whether this configuration element has been modified since it was last
saved or loaded when implemented in a derived class.
if the element has been modified; otherwise, .
Called when an unknown attribute is encountered while deserializing the object.
The name of the unrecognized attribute.
The value of the unrecognized attribute.
if the processing of the element should continue; otherwise, .
Invokes the inherited behavior.
Invokes the inherited behavior.
Invokes the inherited behavior.
Invokes the inherited behavior.
Invokes the inherited behavior.
Gets or sets custom configuration attributes.
Gets a of the properties that are defined for
this configuration element when implemented in a derived class.
A of the properties that are defined for this
configuration element when implemented in a derived class.
Gets the helper.
Represents the Exception Handling Application Block configuration section in a configuration file.
Gets the configuration section name for the library.
Gets the section in the configuration source.
The to get the section from.
The exception handling section.
Initializes a new instance of an class.
Gets a collection of objects.
A collection of objects.
Represents the configuration for an .
Creates a new instance of ExceptionPolicyData.
Initializes a new instance of the class with a name.
The name of the .
Gets a collection of objects.
A collection of objects.
Represents the configuration for an
that will be handled by an exception policy.
Initializes a new instance of the class.
Initializes a new instance of the class with a name, the type and a .
The name of the configured exception.
The type.
One of the values.
Initializes a new instance of the class with a name, the fully qualified type name of the and a .
The name of the configured exception.
The fully qualified type name of the type.
One of the values.
Gets or sets the type.
The type
Gets or sets the fully qualified type name of the type.
The fully qualified type name of the type.
Gets or sets the for the exception.
One of the values.
Gets a collection of objects.
A collection of objects.
Provides an implementation for that
splits policy overrides processing and WMI objects generation, performing approriate logging of
policy processing errors.
The name of the provider type property.
The name of the attributes property.
Initialize a new instance of the class.
Adds the ADM instructions that describe the policies that can be used to override the properties of
a specific instance of the configuration element type managed by the receiver.
The to which the Adm instructions are to be appended.
The configuration object instance.
The configuration source from where to get additional configuration
information, if necessary.
The key for the element's policies.
The default implementation for this method creates a policy, using
to create the policy name and invoking
to add the policy parts.
Subclasses managing objects that must not create a policy must override this method to just add the parts.
Adds the ADM parts that represent the properties of
a specific instance of the configuration element type managed by the receiver.
The to which the Adm instructions are to be appended.
The configuration object instance.
The configuration source from where to get additional configuration
information, if necessary.
The key for the element's policies.
Subclasses that manage custom provider's configuration objects with additional properties may
override this method to add the corresponding parts.
Creates the instances that describe the
configurationObject.
The configuration object for instances that must be managed.
A collection to where the generated WMI objects are to be added.
Represents a mapper for custom exception handler configuration to Wmi.
Creates the instances that describe the
configurationObject.
The configuration object for instances that must be managed.
A collection to where the generated WMI objects are to be added.
Represents the configuration information from a
instance.
Represents the configuration information for an instance of a concrete subclass of
.
There way to relate the objects representing an instance
and the instances in its
collection is through
the and
properties. Also,
the order of the handlers in the Handlers collection is represented with the
property as the order
of the handlers is relevant to the exception handling process.
Initializes a new instance of the class.
The name of the exception handler.
Makes the setting available for WMI clients.
Makes the setting unavailable for WMI clients.
Clear collection of published instances.
Returns an enumeration of the published instances.
A valid class.
Returns the instance corresponding to the provided values for the key properties.
The value for the ApplicationName key property.
The value for the SectionName key property.
The value for the Name key property.
The published instance specified by the values for the key properties,
or if no such an instance is currently published.
Gets the name that identifies the represented configuration information.
Get and set the application name.
Get and set the section name.
Gets the type of the exception to which the handler is registered.
This property is used toghether with
to relate the objects representing exception policies, exception types and exception handlers.
Gets the name of the policy to which the handler is registered.
This property is used toghether with
to relate the objects representing exception policies, exception types and exception handlers.
Gets the order for the represented hadler among the collection of handlers registered to hande the
same exception type in the same exception policy.
Initialize a new instance of the class with a configuration element, the name of the handler,
the filter type, and the attributes for the handler.
The configuration element.
The name of the handler.
The filter type.
The attributes for the handler.
Returns an enumeration of the published instances.
Returns the instance corresponding to the provided values for the key properties.
The value for the ApplicationName key property.
The value for the SectionName key property.
The value for the Name key property.
The published instance specified by the values for the key properties, or if no such an instance is currently published.
Saves the changes on the to its corresponding configuration object.
The configuration object on which the changes must be saved.
if changes have been saved, otherwise.
Gets the name of the type for the custom exception handler.
Gets the collection of attributes for the custom exception handler represented as a
array of key/value pairs.
This type supports the Enterprise Library Manageability Extensions infrastructure and is not intended to
be used directly from your code.
Represents the behavior required to provide Group Policy updates and to publish the
instances associated to the configuration information for the Exception Handling Application Block, and it also manages
the creation of the ADM template categories and policies required to edit Group Policy Objects for the block.
This class performs the actual Group Policy update and Wmi object generation for the
configuration section and its instances together with the
objects they contain. Processing for instances is delegated to
objects registered to the handler data types.
The name of the policies property.
The name of the policy types property.
The name of the policy post handling action property.
The name of the exception handlers property.
This method supports the Enterprise Library Manageability Extensions infrastructure and is not intended to
be used directly from your code.
Initializes a new instance of the class with a
given set of manageability providers to use when dealing with the configuration for exception handlers.
The mapping from configuration element type to
.
This method supports the Enterprise Library Manageability Extensions infrastructure and is not intended to
be used directly from your code.
Adds the ADM instructions that describe the policies that can be used to override the configuration
information for the Exception Handling Application Block.
Overrides the 's properties with the Group Policy values from
the registry.
The configuration section that must be managed.
The which holds the Group Policy overrides.
Overrides the 's configuration elements' properties
with the Group Policy values from the registry, if any, and creates the
instances that describe these configuration elements.
The configuration section that must be managed.
if Group Policy overrides must be applied; otherwise,
.
The which holds the Group Policy overrides for the
configuration section at the machine level, or
if there is no such registry key.
The which holds the Group Policy overrides for the
configuration section at the user level, or
if there is no such registry key.
if WMI objects must be generated; otherwise,
.
A collection to where the generated WMI objects are to be added.
Gets the name of the category that represents the whole configuration section.
Gets the name of the managed configuration section.
Represensta a mapper for excetion handling configuration to Wmi.
Creates the instances that describe the
configurationObject.
The configuration object for instances that must be managed.
A collection to where the generated WMI objects are to be added.
Creates the instances that describe the configurationObject.
instance with Exception settings.
instance with Exception Policy settings.
A collection to where the generated WMI objects are to be added.
Creates the instances that describe the
configurationObject.
The configuration object for instances that must be managed.
A collection to where the generated WMI objects are to be added.
Represents the configuration information for a
instance.
ExceptionPolicyData do not have any properties of their own that are not collections of other configuration objects.
Instances of are still published for the sake of completeness.
Initialize a new instance of the class with a configuration element and the name of the policy.
The configuration element for the policy.
The name of the policy
Returns an enumeration of the published instances.
Returns the instance corresponding to the provided values for the key properties.
The value for the ApplicationName key property.
The value for the SectionName key property.
The value for the Name key property.
The published instance specified by the values for
the key properties, or if no such an instance is currently published.
Saves the changes on the to its corresponding configuration object.
The configuration object on which the changes must be saved.
if changes have been saved, otherwise.
Represents the configuration information for a
instance.
ExceptionTypeData instances are held by
, but
the wmi objects that represent them related only by matching values for the
property.
Initialize a new instance of the class with a coniguration source,
the name of the exception type, the type name and the post handling action.
Makes the setting available for WMI clients.
Makes the setting unavailable for WMI clients.
Clear collection of published instances.
Returns an enumeration of the published instances.
Returns the instance corresponding to the provided values for the key properties.
The value for the ApplicationName key property.
The value for the SectionName key property.
The value for the Name key property.
The published instance specified by the values for the key properties,
or if no such an instance is currently published.
Saves the changes on the to its corresponding configuration object.
The configuration object on which the changes must be saved.
if changes have been saved, otherwise.
Gets the name that identifies the represented configuration information.
Get and set the application name.
Get and set the section name.
Gets the name of the exception type to handle.
Gets the name of the policy to which the represented
instance
belongs.
Gets the name of the value for the for the post handling action.
A strongly-typed resource class, for looking up localized strings, etc.
Returns the cached ResourceManager instance used by this class.
Overrides the current thread's CurrentUICulture property for all
resource lookups using this strongly typed resource class.
Looks up a localized string similar to Attributes.
Looks up a localized string similar to Type.
Looks up a localized string similar to Handlers.
Looks up a localized string similar to Specify settings for exception type '{0}'.
Looks up a localized string similar to Post handling action.
Looks up a localized string similar to Handler: '{0}'.
Looks up a localized string similar to Exception message.
Looks up a localized string similar to Exception type.
Looks up a localized string similar to Exception handling.
Looks up a localized string similar to Specify settings for the Exception Handling Application Block.
Looks up a localized string similar to Exception message.
Looks up a localized string similar to Exception type.
Provides an implementation for that
splits policy overrides processing and WMI objects generation, performing approriate logging of
policy processing errors.
The name of the exception message property.
The name of the replace excetion type property.
Initialize a new instance of the class.
Adds the ADM instructions that describe the policies that can be used to override the properties of
a specific instance of the configuration element type managed by the receiver.
The to which the Adm instructions are to be appended.
The configuration object instance.
The configuration source from where to get additional configuration
information, if necessary.
The key for the element's policies.
The default implementation for this method creates a policy, using
to create the policy name and invoking
to add the policy parts.
Subclasses managing objects that must not create a policy must override this method to just add the parts.
Adds the ADM parts that represent the properties of
a specific instance of the configuration element type managed by the receiver.
The to which the Adm instructions are to be appended.
The configuration object instance.
The configuration source from where to get additional configuration
information, if necessary.
The key for the element's policies.
Subclasses managing objects that must not create a policy will likely need to include the elements' keys when creating the parts.
Overrides the 's properties with the Group Policy values from the
registry.
The configuration object for instances that must be managed.
The which holds the Group Policy overrides for the
configuration element.
Subclasses implementing this method must retrieve all the override values from the registry
before making modifications to the so any error retrieving
the override values will cancel policy processing.
Creates the instances that describe the
configurationObject.
The configuration object for instances that must be managed.
A collection to where the generated WMI objects are to be added.
Gets the template for the name of the policy associated to the object.
Elements that override
to avoid creating a policy must still override this property.
Represents a mapper for a replace handler configuration to Wmi.
Creates the instances that describe the
configurationObject.
The configuration object for instances that must be managed.
A collection to where the generated WMI objects are to be added.
Save the changes in a instance.
Changed instance.
Parent .
Represents the configuration information from a
instance.
Initialize a new instance of the class with a configuration source element,
the name of the handler, the exception message for the handler, and the handler type.
The configuraiton source.
The name of the handler.
The exception message.
The type of the replace exception.
Returns an enumeration of the published instances.
Returns the instance corresponding to the provided values for the key properties.
The value for the ApplicationName key property.
The value for the SectionName key property.
The value for the Name key property.
The published instance specified by the values for the key properties,
or if no such an instance is currently published.
Saves the changes on the to its corresponding configuration object.
The configuration object on which the changes must be saved.
if changes have been saved, otherwise.
Gets the message for the new replacing exception.
Gets the name of the type for the new replacing exception.
Provides an implementation for that
splits policy overrides processing and WMI objects generation, performing approriate logging of
policy processing errors.
The name of the exception message property.
The name of the wrap excetion type property.
Initialize a new instance of the class.
Adds the ADM instructions that describe the policies that can be used to override the properties of
a specific instance of the configuration element type managed by the receiver.
The to which the Adm instructions are to be appended.
The configuration object instance.
The configuration source from where to get additional configuration
information, if necessary.
The key for the element's policies.
The default implementation for this method creates a policy, using
to create the policy name and invoking
to add the policy parts.
Subclasses managing objects that must not create a policy must override this method to just add the parts.
Adds the ADM parts that represent the properties of
a specific instance of the configuration element type managed by the receiver.
The to which the Adm instructions are to be appended.
The configuration object instance.
The configuration source from where to get additional configuration
information, if necessary.
The key for the element's policies.
Subclasses managing objects that must not create a policy will likely need to include the elements' keys when creating the parts.
Overrides the 's properties with the Group Policy values from the
registry.
The configuration object for instances that must be managed.
The which holds the Group Policy overrides for the
configuration element.
Subclasses implementing this method must retrieve all the override values from the registry
before making modifications to the so any error retrieving
the override values will cancel policy processing.
Creates the instances that describe the
configurationObject.
The configuration object for instances that must be managed.
A collection to where the generated WMI objects are to be added.
Gets the template for the name of the policy associated to the object.
Elements that override
to avoid creating a policy must still override this property.
Represents a mapper for wrap hanlder configuration to Wmi.
Creates the instances that describe the
configurationObject.
The configuration object for instances that must be managed.
A collection to where the generated WMI objects are to be added.
Save the changes in a instance.
Changed instance.
Parent .
Represents the configuration information from a
instance.
Returns an enumeration of the published instances.
Returns the instance corresponding to the provided values for the key properties.
The value for the ApplicationName key property.
The value for the SectionName key property.
The value for the Name key property.
The published instance specified by the values for the key properties,
or if no such an instance is currently published.
Saves the changes on the to its corresponding configuration object.
The configuration object on which the changes must be saved.
if changes have been saved, otherwise.
Gets the message for the wrapping exception.
Gets the name of the type for the wrapping exception.
Represents the configuration data for a .
Initializes a new instance of the class.
Initializes a new instance of the class with a name, exception message, and replace exception type name.
The name of the .
The exception message replacement.
The fully qualified assembly name the type of the replacement exception.
Gets or sets the message for the replacement exception.
!~!
!~!
Gets or sets the type of the replacement exception.
Gets or sets the fully qualified type name of the replacement exception.
The fully qualified type name of the replacement exception.
This type supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Represents the process to build a described by a configuration object.
This type is linked to the type and it is used by the
to build the specific object represented by the configuration object.
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Builds a based on an instance of .
The that represents the current building process.
The configuration object that describes the object to build. Must be an instance of .
The source for configuration objects.
The cache to use retrieving reflection information.
A fully initialized instance of .
Container extension to the policies required to create the Exception Handling Application Block's
objects described in the configuration file.
Adds the policies describing the Exception Handling Application Block's objects.
This type supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Represents the process to create the container policies required to create a .
This type supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Represents the process to create the container policies required to create a .
Represents the configuration data for a .
Initializes a new instance of the class.
Initializes a new instance of the class with a name, an exception message, and the fully qualified assembly name of the type of the wrapping exception.
The name of the .
The exception message replacement.
The fully qualified assembly name of type of the wrapping exception
Gets or sets the message for the replacement exception.
!~!
!~!
Gets or sets the type of the replacement exception.
Gets or sets the fully qualified type name of the replacement exception.
The fully qualified type name of the replacement exception.
This type supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Represents the process to build a described by a configuration object.
This type is linked to the type and it is used by the
to build the specific object represented by the configuration object.
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Builds a based on an instance of .
The that represents the current building process.
The configuration object that describes the object to build. Must be an instance of .
The source for configuration objects.
The cache to use retrieving reflection information.
A fully initialized instance of .
Provides data for the DefaultExceptionHandlingInstrumentationProvider.exceptionHandlingErrorOccurred event.
Initializes a new instance of the class.
The name of the associated policy.
The message that describes the error.
Gets the name of the policy associated to the error.
Gets the message that describes the error.
Represents the base class from which all implementations of exception formatters must derive. The formatter provides functionality for formatting objects.
Initializes a new instance of the class with an to format.
The object to format.
The id of the handling chain.
Formats the into the underlying stream.
Formats the exception and all nested inner exceptions.
The exception to format.
The outer exception. This
value will be null when writing the outer-most exception.
This method calls itself recursively until it reaches
an exception that does not have an inner exception.
This is a template method which calls the following
methods in order
-
-
-
-
-
-
-
If the specified exception has an inner exception
then it makes a recursive call.
Formats an using reflection to get the information.
The to be formatted.
This method reflects over the public, instance properties
and public, instance fields
of the specified exception and prints them to the formatter.
Certain property names are ignored
because they are handled explicitly in other places.
When overridden by a class, writes a description of the caught exception.
When overridden by a class, writes the current time.
The current time.
When overridden by a class, writes the of the current exception.
The of the exception.
When overridden by a class, writes the .
The message to write.
When overridden by a class, writes the value of the property.
The source of the exception.
When overridden by a class, writes the value of the property.
The help link for the exception.
When overridden by a class, writes the value of the property.
The stack trace of the exception.
When overridden by a class, writes the value of a object.
The reflected object.
The value of the object.
When overridden by a class, writes the value of a object.
The reflected object.
The value of the object.
When overridden by a class, writes additional properties if available.
Additional information to be included with the exception report
Gets the to format.
The to format.
Gets the id of the handling chain requesting a formatting.
The id of the handling chain requesting a formatting, or if no such id is available.
Gets additional information related to the but not
stored in the exception (eg: the time in which the was
thrown).
Additional information related to the but not
stored in the exception (for example, the time when the was
thrown).
Let the system know that the InstallUtil.exe tool will be run against this assembly
Represents the installer for the instrumentation events. Not intended for direct use.
Required designer variable.
Clean up any resources being used.
true if managed resources should be disposed; otherwise, false.
Required method for Designer support - do not modify
the contents of this method with the code editor.
This type supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Represents the process to build an described by an isntance configuration object.
This is used by the when an instance of the class is requested to
a properly configured instance.
This field supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Represents a view for navigating the configuration data.
Initialize a new instance of the class with an object.
An object.
Gets the from configuration by name.
The name of the policy in configuration.
An object.
Gets the configuration data.
The configuration data.
Provides data for the event.
Initializes a new instance of the class.
The message that describes the error.
Gets the message that describes the error.
An exception that occurred during the exception handling process.
Initializes with defaults.
Initializes with a specified error message.
A message that describes the error.
Initializes with a specified error
message and a reference to the inner exception that is the cause of this exception.
The error message that explains the reason for the exception.
The exception that is the cause of the current exception. If the innerException parameter is not a null reference, the current exception is raised in a catch block that handles the inner exception.
Initializes with serialized data.
The object that holds the serialized object data.
The contextual information about the source or destination.
Non-static entry point to the exception handling functionality.
Instances of can be used to replace references to the static
facade.
Handles the specified
object according to the rules configured for .
An object.
The name of the policy to handle.
The new to throw, if any.
If a rethrow is recommended and is ,
then the original exception should be rethrown; otherwise,
the exception returned in should be thrown.
Whether or not a rethrow is recommended.
The following code shows the usage of the
exception handling framework.
try
{
Foo();
}
catch (Exception e)
{
Exception exceptionToThrow;
if (exceptionManager.HandleException(e, name, out exceptionToThrow))
{
if(exceptionToThrow == null)
throw;
else
throw exceptionToThrow;
}
}
Handles the specified
object according to the rules configured for .
An object.
The name of the policy to handle.
Whether or not a rethrow is recommended.
The following code shows the usage of the
exception handling framework.
try
{
Foo();
}
catch (Exception e)
{
if (exceptionManager.HandleException(e, name)) throw;
}
Excecutes the supplied delegate and handles
any thrown exception according to the rules configured for .
The delegate to execute.
The name of the policy to handle.
The following code shows the usage of this method.
exceptionManager.Process(() => { Foo(); }, "policy");
Non-static entry point to the exception handling functionality.
Instances of can be used to replace references to the static
facade.
Initializes a new instance of the class with a set of policies.
Handles the specified
object according to the rules configured for .
An object.
The name of the policy to handle.
Whether or not a rethrow is recommended.
The following code shows the usage of the
exception handling framework.
try
{
Foo();
}
catch (Exception e)
{
if (exceptionManager.HandleException(e, name)) throw;
}
Handles the specified
object according to the rules configured for .
An object.
The name of the policy to handle.
The new to throw, if any.
If a rethrow is recommended and is ,
then the original exception should be rethrown; otherwise,
the exception returned in should be thrown.
Whether or not a rethrow is recommended.
The following code shows the usage of the
exception handling framework.
try
{
Foo();
}
catch (Exception e)
{
Exception exceptionToThrow;
if (exceptionManager.HandleException(e, name, out exceptionToThrow))
{
if(exceptionToThrow == null)
throw;
else
throw exceptionToThrow;
}
}
Excecutes the supplied delegate and handles
any thrown exception according to the rules configured for .
The delegate to execute.
The name of the policy to handle.
The following code shows the usage of this method.
exceptionManager.Process(() => { Foo(); }, "policy");
This type supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Represents the process to build an described by a configuration object.
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Builds a based on an instance of .
The that represents the current building process.
The name of the that should be created.
The source for configuration objects.
The cache to use retrieving reflection information.
A fully initialized instance of .
Returns the configuration object that represents the named instance in the configuration source.
The name of the required instance.
The configuration source where to look for the configuration object.
The configuration object that represents the instance with name in the logging
configuration section from
This type supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Represents the general process to build an object given a instance of .
This field supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Builds a based on an instance of .
The that represents the current building process.
The configuration object that describes the object to build.
The source for configuration objects.
The cache to use retrieving reflection information.
A fully initialized instance of .
Factory for s. This class is responsible for creating all the internal
classes needed to implement a CacheManager.
Initializes a new instance of the class
with the default configuration source.
Initializes a new instance of the class
with the given configuration source.
The configuration source that contains information on how to build the instances
This type supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Represents the process to build a according to the instrumentation configuration.
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Builds a .
The instrumentation section that is used as configuration.
A fully initialized instance of .
Is the instrumentation gateway when no instances of the objects from the block are involved.
Initializes a new instance of the class.
true if updating performance counters is allowed, false otherwise.
true if writing to the event log is allowed, false otherwise.
true if firing WMI events is allowed, false otherwise.
The application name to use with performance counters.
Initializes a new instance of the class, specifying whether
logging to the event log and firing WMI events is allowed.
true if writing to the event log is allowed, false otherwise.
true if firing WMI events is allowed, false otherwise.
Logs the occurrence of a configuration error for the Enterprise Library Exception Handling Application Block through the
available instrumentation mechanisms.
The exception raised for the configuration error.
The name of the Exception policy in which the configuration error was detected.
Logs the occurrence of an internal error for the Enterprise Library Exception Handling Application Block through the
available instrumentation mechanisms.
The name of the Exception policy in which the error was occurred.
The message that represents the exception thrown when the configuration error was detected.
Handler for the event.
The originator of the event.
The event parameters.
Defines the logical events that can be instrumented for the exception handling block's .
The concrete instrumentation is provided by an object bound to the events of the provider.
The default listener, automatically bound during construction, is .
Fires the event.
The name of the policy involved with the errror.
The message that describes the failure.
Occurs when an error is detected while trying to determine the policy to use.
Errors detected while processing a policy are notified by the policy itself.
Represents the WMI event fired when an error in the configuration for the exception handling block is detected.
Base class for exception handling WMI events.
Initializes a new instance of the class.
The name of the policy which contained configuration errors.
The message that represents the exception thrown when the configuration error was detected.
Gets the name of the policy which contained configuration errors.
Gets the message that represents the exception thrown when the configuration error was detected.
Provides the concrete instrumentation for the logical events raised by a object.
Initializes a new instance of the class.
The name of the this instrumentation listener is bound to.
true if performance counters should be updated.
true if event log entries should be written.
true if WMI events should be fired.
The application instance name
Initializes a new instance of the class.
The name of the this instrumentation listener is bound to.
true if performance counters should be updated.
true if event log entries should be written.
true if WMI events should be fired.
The that is used to creates unique name for each instance.
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Handler for the event.
Sender of the event.
Data for the event.
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Handler for the event.
Sender of the event.
Data for the event.
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
Handler for the event.
Sender of the event.
Data for the event.
Creates the performance counters to instrument the logging events to the instance names.
The instance names for the performance counters.
Defines the logical events that can be instrumented for the exception handling block.
The concrete instrumentation is provided by an object bound to the events of the provider.
The default listener, automatically bound during construction, is .
Fires the event.
Fires the event.
Fires the event.
The message that describes the failure.
Occurs when an exception handler is executed.
Occurs when an Exception is handled.
Occurs when an error occurs handling an Exception is handled.
Represents a policy with exception types and
exception handlers.
The main entry point into the Exception Handling Application Block.
Handles the specified
object according to the given .
An object.
The name of the policy to handle.
Whether or not a rethrow is recommended.
The following code shows the usage of the
exception handling framework.
try
{
Foo();
}
catch (Exception e)
{
if (ExceptionPolicy.HandleException(e, name)) throw;
}
Handles the specified
object according to the rules configured for .
An object.
The name of the policy to handle.
The new to throw, if any.
If a rethrow is recommended and is ,
then the original exception should be rethrown; otherwise,
the exception returned in should be thrown.
Whether or not a rethrow is recommended.
The following code shows the usage of the
exception handling framework.
try
{
Foo();
}
catch (Exception e)
{
Exception exceptionToThrow;
if (ExceptionPolicy.HandleException(e, name, out exceptionToThrow))
{
if(exceptionToThrow == null)
throw;
else
throw exceptionToThrow;
}
}
Represents an entry in an containing
an exception type as the key and a list of
objects as the value.
Instantiates a new instance of the
class.
Handles all exceptions in the chain.
The Exception to handle.
Whether or not a rethrow is recommended.
Rethrows the given exception. Placed in a seperate method for
easier viewing in the stack trace.
Attaches an to be used for instrumentation on this instance.
The that is attached.
Represents a policy for handling exceptions.
Initializes a new instance of the class with the policy name and a dictionary of policy entries.
The policy name.
A set of objects.
Checks if there is a policy entry that matches
the type of the exception object specified by the
parameter
and if so, invokes the handlers associated with that entry.
The Exception to handle.
Whether or not a rethrow is recommended.
The algorithm for matching the exception object to a
set of handlers mimics that of a standard .NET exception policy.
The specified exception object will be matched to a single
exception policy entry by traversing its inheritance hierarchy.
This means that if a FileNotFoundException, for example, is
caught, but the only exception type that the exception policy
knows how to handle is System.Exception, the event handlers
for System.Exception will be invoked because
FileNotFoundException ultimately derives from System.Exception.
Gets the policy entry associated with the specified key.
Type of the exception.
The corresponding to this exception type.
Gets the instrumentation provider that is used to fire instrumentation events for this instance.
The that is used to fire instrumentation events for this instance.
Traverses the specified type's inheritance hiearchy
Provides common functions for the Exception Handling Application Block classes. Cannot inherit from this class.
Formats a message by replacing the token "{handlingInstanceID}" with the handlingInstanceID.
The original message.
The handlingInststanceID passed into the exceptionHandlerData.
The formatted message.
Formats an exception message so that it can be sent to the event log later, by someone else.
The policy that is running.
The exception that occured in the chain.
The exception when the chain failed.
The original exception.
Defines the contract for an ExceptionHandler. An ExceptionHandler contains specific handling
logic (i.e. logging the exception, replacing the exception, etc.) that is executed in a chain of multiple
ExceptionHandlers. A chain of one or more ExceptionHandlers is executed based on the exception type being
handled, as well as the .
When implemented by a class, handles an .
The exception to handle.
The unique ID attached to the handling chain for this handling instance.
Modified exception to pass to the next exceptionHandlerData in the chain.
Represents the WMI event fired when an error ocurred in the exception handling block.
Initializes a new instance of the class.
The name of the exception policy this failure ocurred in.
The message that represents the exception causing the failure.
Gets the message that represents the exception causing the failure.
Gets the name of the exception policy this failure ocurred in.
Determines what action should occur after an exception is handled by the configured exception handling chain.
Indicates that no rethrow should occur.
Notify the caller that a rethrow is recommended.
Throws the exception after the exception has been handled by all handlers in the chain.
A strongly-typed resource class, for looking up localized strings, etc.
Returns the cached ResourceManager instance used by this class.
Overrides the current thread's CurrentUICulture property for all
resource lookups using this strongly typed resource class.
Looks up a localized string similar to Additional Info:.
Looks up a localized string similar to Enterprise Library Exception Handling Application Block.
Looks up a localized string similar to HANDLING CHAIN EXCEPTION:.
Looks up a localized string similar to A configuration failure occurred while creating policy ‘{0}’..
Looks up a localized string similar to The error occurred while handling an exception for policy "{0}"..
Looks up a localized string similar to Exceptions Handled/sec is the rate at which exceptions were handled..
Looks up a localized string similar to Exception Handlers Executed/sec is the rate at which exception handlers were executed..
Looks up a localized string similar to Unable to rethrow exception: The exception to throw is null..
Looks up a localized string similar to The policy with name '{0}' cannot be found. Exception handling aborted..
Looks up a localized string similar to The requested exception policy '{0}' could not be found..
Looks up a localized string similar to The value can not be an empty string or null..
Looks up a localized string similar to The type must be of type Exception..
Looks up a localized string similar to An exception of type '{0}' occurred and was caught..
Looks up a localized string similar to Access failed.
Looks up a localized string similar to Help link : {0}.
Looks up a localized string similar to Inner Exception.
Looks up a localized string similar to Message : {0}.
Looks up a localized string similar to OFFENDING EXCEPTION:.
Looks up a localized string similar to ORIGINAL EXCEPTION:.
Looks up a localized string similar to Permission Denied.
Looks up a localized string similar to POLICY NAME: {0}.
Looks up a localized string similar to Access failed.
Looks up a localized string similar to Source : {0}.
Looks up a localized string similar to Stack Trace.
Looks up a localized string similar to The stack trace is unavailable..
Looks up a localized string similar to Total Exceptions Handlers Executed is the total number which exception handlers were executed..
Looks up a localized string similar to Total Exceptions Handled is the total number of exceptions handled..
Looks up a localized string similar to Type : {0}.
Looks up a localized string similar to Unable to handle exception: '{0}'..
Looks up a localized string similar to <undefined value>.
Replaces the exception in the chain of handlers with a cleansed exception.
Initializes a new instance of the class with an exception message and the type of to use.
The exception message.
The type of to use to replace.
Initializes a new instance of the class with an exception message
resolver and the type of to use.
The exception message resolver.
The type of to use to replace.
Replaces the exception with the configured type for the specified policy.
The original exception.
The unique identifier attached to the handling chain for this handling instance.
Modified exception to pass to the next exceptionHandlerData in the chain.
Replaces an exception with a new exception of a specified type.
The message for the new exception.
The replaced or "cleansed" exception. Returns null if unable to replace the exception.
The type of exception to replace.
Gets the message for the new exception.
Represents an exception formatter that formats exception objects as text.
Initializes a new instance of the
using the specified
and
objects.
The stream to write formatting information to.
The exception to format.
Initializes a new instance of the
using the specified
and
objects.
The stream to write formatting information to.
The exception to format.
The id of the handling chain.
Formats the into the underlying stream.
Writes a generic description to the underlying text stream.
Writes and formats the exception and all nested inner exceptions to the .
The exception to format.
The outer exception. This
value will be null when writing the outer-most exception.
Writes the current date and time to the .
The current time.
Writes the value of the
property for the specified exception type to the .
The of the exception.
Writes the value of the
property to the underyling .
The message to write.
Writes the value of the specified source taken
from the value of the
property to the .
The source of the exception.
Writes the value of the specified help link taken
from the value of the
property to the .
The exception's help link.
Writes the name and value of the specified property to the .
The reflected object.
The value of the object.
Writes the name and value of the specified field to the .
The reflected object.
The value of the object.
Writes the value of the property to the .
The stack trace of the exception.
If there is no stack trace available, an appropriate message will be displayed.
Writes the additional properties to the .
Additional information to be included with the exception report
Indents the .
Gets the underlying
that the current formatter is writing to.
Wraps the current exception in the handling chain with a new exception of a specified type.
Initialize a new instance of the class with an exception message and the type of to use.
The exception message.
The type of to use to wrap.
Initialize a new instance of the class with an exception message resolver
and the type of to use.
The exception message resolver.
The type of to use to wrap.
Wraps the with the configuration exception type.
The exception to handle.
The unique ID attached to the handling chain for this handling instance.
Modified exception to pass to the next exceptionHandlerData in the chain.
Gets the of exception to wrap the original exception with.
The of exception to wrap the original exception with.
Gets the message of the wrapped exception.
The message of the wrapped exception.
Represents an exception formatter that formats exception objects as XML.
Initializes a new instance of the class using the specified and objects.
The in which to write the XML.
The to format.
The id of the handling chain.
Initializes a new instance of the class using the specified and objects.
The in which to write the XML.
The to format.
An with indented formatting is created from the specified .
The id of the handling chain.
Formats the into the underlying stream.
Writes the current date and time to the .
The current time.
Writes the value of the property to the .
The message to write.
Writes a generic description to the .
Writes the value of the specified help link taken
from the value of the
property to the .
The exception's help link.
Writes the value of the specified stack trace taken from the value of the property to the .
The stack trace of the exception.
Writes the value of the specified source taken from the value of the property to the .
The source of the exception.
Writes the value of the
property for the specified exception type to the .
The of the exception.
Writes and formats the exception and all nested inner exceptions to the .
The exception to format.
The outer exception. This value will be null when writing the outer-most exception.
Writes the name and value of the specified property to the .
The reflected object.
The value of the object.
Writes the name and value of the object to the .
The reflected object.
The value of the object.
Writes additional information to the .
Additional information to be included with the exception report
Gets the underlying that the formatted exception is written to.
The underlying that the formatted exception is written to.